Reference 5022i Speakers~5-1/4" two-way loudspeaker with Plus One® woofer cone and edge-driven dome tweeter.~5-1/4" two-way loudspeaker with Plus One® woofer cone and edge-driven dome tweeter.
• Plus One® woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency.
• Infinity Reference speakers have two-ohm voice coils. This unique approach extracts more power from your amp or head unit. Many factory OE systems include two-ohm speakers. Infinity Reference speakers are perfect for those applications.If your head unit or amplifier is rated to drive a four-ohm load, Infinity Reference speakers are still the best option.
• Edge-driven textile dome tweeters - These are not commonly used w-domes, but fully-edge-driven domes like those found in better home audio speakers. The benefit is increased power handling and reduced distortion at high output levels. This technology also allows for better integration with the mid/woofer.
• Unipivot™ (patent no. 6,002,780) allows the tweeter to be pointed at the listeners location even when the speaker is mounted off axis. This optimizes the stereo image and ensures a more uniform response.
• Tweeter level adjustment - The 5022i also features a tweeter level adjustment located on the front of the speaker and can be set at the reference level of 0dB. If the speakers are located low in the doors or if you are looking for a brighter sound, set the tweeter at +3dB
SPECIFICATIONS General
- Power Handling, RMS 45 watts
- Power Handling, Peak 135 watts
- Sensitivity (2.83V @ 1m) 92dB
- Frequency Response 67Hz -21kHz
- Impedance 2 ohms
- Mounting Depth 2-1/4" (57mm)
~Reference 5022i|5022i|~2234~2239~~
Kappa 50.7cs Speakers~KAPPA50.7CS 5-1/4" two-way component system.~Plus One woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency.
Edge-driven MMD dome tweeter - These are not commonly used W-domes, but fully edge driven domes like those found in fine home audio loudspeakers. This much larger voice coil increases power handling and provides better sonic integration with the mid-woofer.
Woven glass fiber woofer cone material is extremely stiff, minimizing cone flex which yeilds very low distortion and improved clarity, an Infinity trademark.
SLI high-output design. Conventional 4-ohm speakers do not leverage allof the power available from today's car audio amplifiers and high-powered head units. This topology extracts every last watt from the amplifier source, increasing overall system output and efficiency.
Computer-optimized voice-matched crossovers - Each Kappa multielement and component system features a crossover that has been voice-matched using audiophile grade air core inductors and polypropylene capacitors. The result is flawless performance with incredible detail and accuracy.
Adjustable tweeter level-Each Kappa component system features a user adjustable tweeter level control on the passive crossover.
- Power Handling, RMS: 85 Watts
- Power Handling, Peak: 255 Watts
- Sensitivity: 94dB
- Frequency Response: 55Hz - 25kHz
- Mounting Depth: 2-1/16"
- Impedance: 2 Ohms
~Kappa 50.7cs|Kappa 50.7cs|~2234~3347~~
Kappa 652.7i Speakers~.KAPPA652.7i 165mm 2-WAY LOUDSPEAKER. 75w rms/225w peak.~
- Plus One® woofer cones - This technology delivers a cone with more surface area than competing models of the same size. This increase can be as much as 30%, depending on the individual speaker model. The benefit is increased bass output and increased efficiency.
- Edge-driven MMD® tweeters - These are not commonly used W-domes, but fully edge-driven domes like those found in better home audio speakers. The benefit is increased power handling and reduced distortion at high output levels. This technology also allows for better integration with the mid/woofer.
- Woven-glass-fiber woofer cone material is extremely stiff, minimizing cone flex; this results in very low distortion and improved clarity, Infinity trademarks.
- SLI™ high-output design - Conventional 4-ohm speakers do not leverage all of the power available from today's car audio amplifiers and high-output powered head units. This topology extracts every last watt from the amplifier source, increasing overall system output and efficiency.
- Computer-optimized voice-matched outboard passive crossovers - Each Kappa® multielement and component system features an outboard crossover that has been voice-matched using audiophile-quality air core inductors and polypropylene capacitors. The result is flawless performance with incredible detail and accuracy.
- Tweeter level control - Both the multielements and component systems feature a tweeter level control, allowing you to optimize the response for either on or off axis.
~Kappa 652.7i|Kappa652.7i|~2234~2267~~